The ZEUS clearly features a more modern design but is otherwise technically similar with all the same parameters as the OLYMP and AFRODITA classic rustic stoves.

The heart of the stove is the E1 liner (or E1 VO in variants with a water heat exchanger), surrounded by smooth tiles without any design in two contrasting colors. Naturally, each customer can choose their own colors from the catalog. The contrasting vent tiles above and below the firebox provide a distinctive esthetic element. The stove does not stand on legs but sits on a low tile base to give it clean, simple lines.

As the ZEUS is typically used in modern interiors, the standard model includes an external air intake directly into the stove. You can also choose to run the flue pipe from the back or the top.

ZEUS diana a mimaKerkotherm picasso efekt 302 Kerkotherm nerez lesk 711 3 067 EUR
ZEUS diana a mimaKerkotherm havana 627 Kerkotherm tabák 621 3 067 EUR
ZEUS with exchangerdiana a mimaKerkotherm picasso efekt 302 Kerkotherm nerez lesk 711 3 473 EUR
ZEUS with exchangerdiana a mimaKerkotherm havana 627 Kerkotherm tabák 621 3 473 EUR

Surcharge for other color than those mentioned in the price list is 10 %.
All prices include VAT.

Technical parameters
heating power
5–11 kW
exchanger power
4–8 kW
water exchanger
fuel type
wood, wood briquette
E1, E1 VO
1270 mm
720 mm
470 mm
226 kg,
s výměníkem 230 kg
flue diameter
150 mm
flue outlet
E1 – rear, top
E1vo – top, rear by request
height of neck axis centred
E1 – 1065 mm
E1vo – 1022 mm
fuel consumption
cca 2,1 kg/hr
log length
33 cm
water capacity
20 l
external air inlet

ZEUS regina modrozelená 816
ZEUS regina 816 modrozelená
ZEUS kaštan efekt
ZEUS diana-mima nerez picaso atyp
ZEUS diana mima tera tabak
ZEUS diana grafit bílá lesk
ZEUS atyp zvýšený, hladká bílá
ZEUS s výměníkem, rámeček hnědá, kachle Kerko
ZEUS s výměníkem 6 řad, diana bílá lesk, kachle Kerko
ZEUS nerez lesk picaso, kachle Kerko
ZEUS kaštan efekt
ZEUS diana mima tera tabak
ZEUS diana nerez picasso

All variants of the ZEUS use an E1 stove liner with regulated heat output of 5–11 kW. With high ceilings of 2.5 m this means suitable heating for approximately 100 m² of floor space – i.e. most homes and also larger social spaces, restaurants, clubhouses, guesthouses, etc. Of course, if the space is divided into several closed rooms, you will want to consider a stove with a water heat exchanger.

In models with a heat exchanger (insert E1 VO), 8 kW out of a total of 11 kW goes to heat water in the hot water heating system that can easily heat separate, distant rooms. The 3 kW radiated into the space where the stove is located will heat roughly 60 m³ (approx. 24 m² with a ceiling height of 2.5m). Using and connecting a stove with a water heat exchanger provides greater comfort and long-term savings on heating costs. However, the investment in installation is higher and the installation itself is technically more demanding. This makes more sense for permanent residences than weekend cottages etc. Circulation pumps require electricity, and possibly a back-up power source in the event of power outages, or water intake and outlet using a cooling loop. It is possible (but again more expensive) to send heated water to an accumulation tank instead of directly to the heating system. This is a very efficient use of the heat produced by the stove that provides hot water for utility use.

As with other stoves, the recommended fuel is dry hardwood or quality wood briquettes. Wood should not have a moisture content greater than 20%, which corresponds to roughly 2 years of storage.

All regular and hot water stoves require professional installation and connection while complying with all regulations and fire safety standards, including placement of the stove at a distance of at least 20 cm from walls (and twice that distance from combustible materials), placing the stove on a fireproof base (extending at least 300 mm in front of the door and ashpan and 100 mm in other directions), etc. and having a properly sized chimney with a flue pipe at least 150 mm in diameter with effective height of at least 5 meters. The connection of the stove to a hot water system is performed by a professional heating company. The cost of these services is not included in the price, but all arrangements can be made when buying the stove.


Quick question

Česky  Deutsch  English
2013–2017 © ŽELETAVSKÁ KAMNA, tel.: +420 568 455 238, fax: +420 568 455 120, e-mail: kamna@brabenec.info   top